Charging station 22kw Type 2 EVPoint EVP-3P-22-PLUS-C5


In stock

Three-phase charging station for charging electric vehicles with the possibility of control via smartphone or operator panel. The station offers fast and safe charging with a power of up to 22 kW.

Multi-function three-phase charging station with Type 2 cable

EVPoint EV22 is a new generation charging station that allows fast and safe AC charging with a power of up to 22 kW. The device is a perfect solution for charging at home and in public by connecting a Type 2 cable for European cars or a Type 1 adapter for American ones.

  • Maximum power: 22.1 kW (three-phase), 32 amps
  • Nominal voltage: 230 V AC (for single-phase connection); 400 V AC (in three-phase connection)
  • Connection to electric vehicle: Cable Type 2 IEC 62196-2
  • Communication protocol: OCPP 1.6J
  • Communication modules: WLAN: 802.11 b/g/n/e/i (2.4GHz); Bluetooth: BT4.2 (only serves for station configuration); Ethernet (LAN) via RJ45 port (10/100 Mbps); 4G/LTE
  • Authorization: via the EVPoint mobile app, RFID card, Plug & Charge
  • Residual current protection: built-in class B, RCD DC < 6 mA and AC < 30 mA; checking the ground wire; +- 207v – 253v check
  • Built-in electricity meter
  • Operating temperature: -25°C + 55°C
  • Installation: On a wall or on a stand; For installation in open and closed areas
charging station 22kw type 2 evpoint EVP-3P-22-PLUS-C5 5
evpoint app

Smart regulation and adjustment via a free mobile app

The Internet connection capabilities of the stationary station allow intelligent adjustment of your charges, and the processes can be with a set operating mode during the hours when the electricity is at a lower price / tariff.

From the comfort of your smartphone and thanks to the EVPoint mobile application, you can set the minimum and maximum electricity you wish to charge, the time range in which the process should be carried out and save a daily schedule so that you do not have to constantly enter the desired parameters.

Through the mobile application, the station will fulfill your stated requirements, which guarantees the maximum efficiency of each charging with the EV22 station.

Choice of charging power

The charge rate can also be controlled. The single-phase charging station can charge at the amperage specified by you up to 32A – 22 kW. Given the mass-used single-phase on-board chargers in electric vehicles currently on the market, the EV22 appears to be one of the most optimized chargers in terms of functionality and charging capabilities.

Thanks to its compact dimensions, the station can also be used as a mobile charger, and the charging power selection option allows adjustment to the optimal characteristics of the source of electrical energy.

When installed in a public location where other smart stations are also installed, EVPoint EV22 can monitor the current consumption and adjust the charging powers of all devices so that the network is not overloaded and at the same time the process is not interrupted. This feature is known as Dynamic Load Management.

evpoint app control
evpoint app charging control

Real-time monitoring of charges

A convenient function of the EVPoint mobile application in combination with the charging station is the ability to remotely monitor charging in real time. In this way, you can see the current power, change the preset parameters or, if necessary, stop the charging.

Charging history

Every charging initiated through the app is recorded and stored in your charging history. From this section you can display statistics for a certain period and analyze the consumption of electricity used for the vehicle from your home.

RFID and Plug & Charge

If you use the charger to charge in a public location, you can enter an option to start the charge via RFID card. This way, anyone who has a specially trained card for your station will have access to it. When used at home, or if the station is installed in an object to which only you have access, the device can be set to the so-called “Plug & Charge” mode – you connect the cable and charging begins.

LED indicator

The round color LED indicator gives information about the charging status. Through it, you can get an idea if the station is ready to use, is charging successfully, or has some problem and should not be used.

Protection and safety

Some stationary charging stations require the installation of additional devices to ensure safe charging, which in turn can increase the cost of the project. With the EVPoint EV22, the installation of such protections is not necessary. The station has built-in residual current protection, which is taken care of in the event of a problem.

charging station 22kw type 2 evpoint EVP-3P-22-PLUS-C5 3

CTClamp - intelligent power distribution to avoid network overload

The CTClamp function allows the simultaneous operation of electrical appliances and the charging station without overloading the network.

How does it actually work?

Through the installation of a sensor in the central panel, the charging station EVPoint EV22 PLUS receives real-time data on the current consumption of the household / object. If the limit of a given network is, for example, 30 kW, and at a specific moment other consumers are using 27 kW of electrical energy, the charging station will receive information and adapt charging according to the available energy. With reduced consumption, the station will adapt the power to the maximum available values.

In this way, it is impossible for the network to be overloaded as a result of charging the electric car. In most cases, you won’t need to claim a higher wattage for your batch, because with the power regulation feature, you’ll have peace of mind that it will never trip the main fuse and you’ll be able to simultaneously charge your EV and use other powerful appliances in same installation.

Easy installation

With the new EVPoint charging station model, the box designers have made several very practical decisions. One of them is the possibility of winding the cable around the station itself, so that it does not get dirty and does not interfere with you when it is on the floor. In this way, the need for an additional stand for the cable is no longer needed, you can eventually add to the station a small stand to lock the Type 2 plug itself, which is placed near the stations.

One of the most important advantages of this charging station model is the easy installation. To place the station on a wall or pedestal, a special plate is provided, which is included in the station kit. Unlike most station models on the market, with the EVPoint EV22 Plus, you don’t need to disassemble the entire box to connect the power supply and LAN cable.

In order to protect the electronics of the device, all the connecting modules are taken out in a separate compartment of the case, which is accessible by removing the cover at the bottom of the front panel. The connection of the power cables is done through the quick connection terminal, it is desirable to use a flexible multi-core cable. Connecting a LAN cable or inserting a SIM card does not present any problem because their sockets are also located in this compartment.

charging station 22kw type 2 evpoint EVP-3P-22-PLUS 4
Electric car3.7 kW7.4 kW11 kW22 kW
HYUNDAI IONIQ ELECTRIC (28 kWh)7.5 hours4 hours4 hours4 hours
HYUNDAI IONIQ 5 (72.6 kWh)20 hours10 hours6.5 hours6.5 hours
PEUGEOT E-208 (47.5 kWh)13 hours6.5 hours4.5 hours4.5 hours
RENAULT ZOE (41 kWh)11 hours5.5 hours4 hours1.5 hours
BMW I3 (37.9 kWh)12 hours6 hours4 hours4 hours
SKODA ENYAQ IV (58 kWh)18.5 hours9 hours6 hours6 hours
Mercedes EQE 350+ (90.6 kWh)29 hours14.5 hours9.5 hours5 hours
BMW iX M60 (105.2 kWh)33.5 hours16.5 hours11 hours11 hours

Made in Bulgaria.
Warranty 2 years.

Additional information

Weight8 kg
Dimensions36 × 20 × 12 cm


EV Cable Type


Cable length

Maximum еlectric current

Show only reviews in English (0)

Be the first to review “Charging station 22kw Type 2 EVPoint EVP-3P-22-PLUS-C5”

Your email address will not be published.


There are no reviews yet.

Main Menu