Charging station 11kw Type 2 EVPoint EVP-3P-11-S2


In stock

Three-phase charging station for charging electric vehicles with the possibility of control via smartphone or operator panel. The station offers fast and safe charging with a power of up to 11kW.

Three-phase charging station with multiple functions 11kw with Type 2 socket

EVPoint EV11 is a new generation charging station that allows fast and safe AC charging with a power of up to 11 kW. The device is a perfect solution for charging at home and in public by connecting a Type 2 cable for European cars or a Type 1 adapter for American ones.

  • Maximum power: 11 kW (three-phase), 16 amps
  • Nominal voltage: 230 V AC (for single-phase connection); 400 V AC (in three-phase connection)
  • Connection to electric vehicle: Contact Type 2 IEC 62196-2
  • Communication protocol: OCPP 1.6J
  • Communication modules: WLAN: 802.11 b/g/n/e/i (2.4GHz); Bluetooth: BT4.2; Ethernet; GSM;
  • Authorization: via the EVPoint mobile app, RFID card, Plug & Charge
  • Residual current protection: built-in class B, RCD DC < 6 mA and AC < 30 mA; checking the ground wire; +- 207v-253v check
  • Built-in electricity meter
  • Operating temperature: -25°C + 60°C
  • Installation: On the wall
charging station 22kw type 2 evpoint EVP-3P-22-S2
evpoint app

Smart regulation and adjustment via a free mobile app

The Internet connection capabilities of the stationary station allow intelligent adjustment of your charges, and the processes can be with a set operating mode during the hours when the electricity is at a lower price / tariff.

From the comfort of your smartphone and thanks to the EVPoint mobile application, you can set the minimum and maximum electricity you wish to charge, the time range in which the process should be carried out and save a daily schedule so that you do not have to constantly enter the desired parameters.

Through the mobile application, the station will fulfill your stated requirements, which guarantees the maximum efficiency of each charging with the EVP-3P-11-S2 station.

Choice of charging power

The charge rate can also be controlled. The single-phase charging station can charge at the amperage specified by you up to 16A – 11 kW. Given the massively used single-phase on-board chargers in electric vehicles on the market at the moment, the EVP-3P-11-S2 appears to be one of the most optimized chargers in terms of functionality and charging capabilities.

Thanks to its compact dimensions, the station can also be used as a mobile charger, and the charging power selection option allows adjustment to the optimal characteristics of the source of electrical energy.

When installed in a public location, where other smart stations are also installed, EVPoint EVP-3P-11-S2 can monitor the current consumption and adjust the charging powers of all devices in order not to overload the network, and at the same time the process should not be interrupted. This feature is known as Dynamic Load Management.

evpoint app control
evpoint app charging control

Real-time monitoring of charges

The convenient function of the EVPoint mobile application in combination with the charging station is the ability to remotely monitor charging in real time. In this way, you can see the current power, change the parameter results in advance or stop the charging if necessary.

Charging history

Every charging initiated through the app is recorded and stored in your charging history. From this section you can display statistics for a certain period and analyze the consumption of electricity used for the vehicle from your home.

RFID and Plug & Charge

If you use the charger to charge in a public location, you can use the option to start charging via RFID card. This way, anyone who has a specially trained card for your station will have access to it. When used at home, or if the station is installed in an object to which only you have access, the device can be set up in the so-called “Plug & Charge” mode – connect the cable and start charging.

LED indicator

The round color LED indicator gives information about the charging status. Also, can you get an idea of the station being ready to use, booting successfully, or has some problem and should not be used.

Protection and safety

Some stationary charging stations require the installation of additional devices to ensure safe charging, which can increase the cost of the project on your end. With the EVPoint EVP-3P-11-S2, the installation of such protections is not necessary. The station has built-in residual current protection, which is taken care of in the event of a problem.

charging station 22kw type 2 evpoint EVP-3P-22-S2 2

CT Clamp - intelligent power distribution to avoid network overload

The CTClamp function allows the simultaneous operation of electrical appliances and the charging station without overloading the network.

How does it actually work?

Through the installation of a sensor in the central panel, the charging station EVPoint EV22 PLUS receives real-time data on the current consumption of the household / object. If the limit of a given network is, for example, 30 kW, and at a specific moment other consumers are using 27 kW of electrical energy, the charging station will receive information and adapt charging according to the available energy. With reduced consumption, the station will adapt the power to the maximum available values.

In this way, it is impossible for the network to be overloaded as a result of charging the electric car. In most cases, you won’t need to claim a higher wattage for your batch, because with the power regulation feature, you’ll have peace of mind that it will never trip the main fuse and you’ll be able to simultaneously charge your EV and use other powerful appliances in same installation.

Electric car3.7 kW11 kW
HYUNDAI IONIQ ELECTRIC (28 kWh)7.5 hours4 hours
HYUNDAI IONIQ 5 (72.6 kWh)20 hours6.5 hours
PEUGEOT E-208 (47.5 kWh)13 hours4.5 hours
RENAULT ZOE (41 kWh)11 hours4 hours
BMW I3 (37.9 kWh)12 hours4 hours
SKODA ENYAQ IV (58 kWh)18.5 hours6 hours
Mercedes EQE 350+ (90.6 kWh)29 hours9.5 hours
BMW iX M60 (105.2 kWh)33.5 hours11 hours

Made in Bulgaria.
Warranty 2 years.

Additional information

Weight3 kg
Dimensions34 × 23 × 12 cm


EV Cable Type


Maximum еlectric current

Show only reviews in English (0)

Be the first to review “Charging station 11kw Type 2 EVPoint EVP-3P-11-S2”

Your email address will not be published.


There are no reviews yet.

Main Menu